After #18 (MAX_CONNECTIONS=2), onConnect sets need_advertise=true to
fill the second slot. start_advertising() then unconditionally overwrote
state to ADVERTISING, so with a single connected client the UI flipped
CONNECTED -> ADVERTISING on the next tick and stayed there until a
second central attached.
Only flip the state to ADVERTISING when no clients are connected.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
macOS Bluetooth quirks made the original BLE setup unusable from a Mac
host. Five focused changes to fix discovery, pairing, the keyboard
identification wizard, and concurrent connections, plus a couple of
cross-platform daemon/script niceties.
Firmware (ble.cpp):
* Advertise the standard HID Service UUID (0x1812) in the primary
packet. Without it, macOS Sequoia's Bluetooth Settings GUI
recognizes the device internally but silently hides it from the
"Nearby Devices" list. Service UUIDs >16-bit overflow the 31-byte
advertising packet, so the custom data-service UUID moved to the
scan response.
* Switch PnP ID from Apple's USB vendor (0x05AC + Magic Keyboard
PID 0x820A) to Espressif's BT SIG vendor (0x02E5). macOS validates
Apple-claimed HIDs against known device IDs and refuses to surface
a Connect button for spoofers.
* Add the LED output report (Num/Caps/Scroll Lock) to the HID
descriptor — macOS treats a keyboard descriptor without LEDs as
"incomplete" and triggers the Keyboard Setup Assistant repeatedly.
* Set HID country code to 33 (US ANSI) instead of 0 (Not Supported)
so macOS can identify the layout without asking the user.
* Bump CONFIG_BT_NIMBLE_MAX_CONNECTIONS to 2 and restart advertising
after each accept. macOS holds one connection for the HID keyboard
link; the daemon now gets its own slot for the data service in
parallel, instead of either side starving the other.
screenshot.sh: auto-pick /dev/cu.usbmodem101 on macOS vs /dev/ttyACM0
on Linux, fall back to PlatformIO's bundled Python if pyserial isn't
on the system Python (PEP 668 blocks `pip install` on Homebrew Python),
and pass the actual framebuffer dimensions to ffmpeg instead of
hardcoding 480x480.
daemon/claude_usage_daemon.py: log API HTTP status + response body on
4xx/5xx so silent token-expiry failures (the daemon was reporting
{"s":0,"w":0} payloads instead of surfacing a 401) are visible in the
daemon log.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Six public API functions had no callers anywhere in the firmware:
splash_prev, splash_set_active, splash_current_name, splash_count,
ble_is_connected, imu_set_rotation, power_is_usb_connected,
power_usb_changed. Trimming them lets power.cpp drop the VBUS state
machine (cached_usb, usb_changed_flag, last_vbus_ms,
enableVbusVoltageMeasure). usage_rate_reset becomes file-static since
the only caller is in usage_rate.cpp itself. Montserrat font flags in
platformio.ini were enabled but never referenced.
- Cache invalidation: drop ~/.config/claude-usage-monitor/ble-address and remove
the dead MAC from bluez on connect failure, so swapping ESP boards no longer
pins the daemon to a stale factory MAC
- Scan robustness: pick first matching candidate (head -1), sanity-check cached
content for valid MAC format, handle multiple Claude Controllers in bluez
- 5s tick + 60s poll: inner loop wakes every 5s for fast disconnect detection
while keeping Anthropic API cadence at one minute
- Refresh-request channel: new GATT characteristic ...0004 NOTIFY, firmware
fires once in onSubscribe when has_received_data is false; daemon subscribes
via setsid'd dbus-monitor pipeline (process group cleanup avoids the
bash-wait-on-job hang we hit on disconnect)
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Move all communication from USB to BLE. The device now advertises as
"Claude Controller" and acts as both a BLE HID keyboard (for touch
gestures) and a GATT data server (for usage updates from the daemon).
- Add NimBLE-Arduino BLE module with custom GATT service + HID keyboard
- Add third screen (Bluetooth) with connection status, MAC, reset button
- Rewrite daemon in bash using bluetoothctl/busctl for BLE GATT writes
- Add screenshot capture via LVGL snapshot over serial
- Remove TinyUSB mode — normal pio upload works again
- Update README with BLE architecture, screenshots, gesture docs
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
