Add Waveshare ESP32-S3-Touch-AMOLED-2.06 board port + Windows daemon fixes

- New board firmware/src/boards/waveshare_amoled_206/ (CO5300 410x502, FT3168 touch, AXP2101 PMU, QMI8658 IMU). PlatformIO env waveshare_amoled_206. CO5300_COL_OFFSET=22, fixed orientation, PWR button on GPIO10, FocalTech inline touch reader. - Windows daemon: fix advertised device name (Claude Controller -> Clawdmeter) to match firmware ble.cpp, and add CLAWDMETER_ADDRESS env fallback so it connects by address when the bonded HID device is not advertising (Windows keeps it HID-connected). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-20 12:46:46 +03:00
parent c49fb52981
commit c610e3af48
10 changed files with 457 additions and 3 deletions
@@ -111,6 +111,63 @@ lib_deps =
    h2zero/NimBLE-Arduino@^2.1.1


+[env:waveshare_amoled_206]
+; Waveshare ESP32-S3-Touch-AMOLED-2.06 watch kit. 410x502 CO5300 + FT3168
+; touch + AXP2101 PMU + QMI8658 IMU. 32MB flash / 8MB OPI PSRAM. No IO
+; expander (reset lines are direct GPIOs), fixed orientation.
+platform = https://github.com/pioarduino/platform-espressif32/releases/download/55.03.38-1/platform-espressif32.zip
+board = esp32-s3-devkitc-1
+framework = arduino
+board_build.arduino.memory_type = qio_opi
+board_upload.flash_size = 16MB
+board_upload.maximum_size = 16777216
+board_build.partitions = default_16MB.csv
+upload_speed = 921600
+monitor_speed = 115200
+
+build_src_filter =
+    +<*>
+    -<boards/>
+    +<boards/waveshare_amoled_206/>
+
+build_flags =
+    -DBOARD_AMOLED_206
+    -DARDUINO_USB_CDC_ON_BOOT=1
+    -DBOARD_HAS_PSRAM
+    -DXPOWERS_CHIP_AXP2101
+    ; NimBLE config — peripheral, 2 simultaneous connections so the OS can
+    ; hold the HID link while the daemon holds the data-service connection.
+    -DCONFIG_BT_NIMBLE_ROLE_BROADCASTER=1
+    -DCONFIG_BT_NIMBLE_ROLE_PERIPHERAL=1
+    -DCONFIG_BT_NIMBLE_ROLE_CENTRAL=0
+    -DCONFIG_BT_NIMBLE_ROLE_OBSERVER=0
+    -DCONFIG_BT_NIMBLE_MAX_CONNECTIONS=2
+    ; LVGL config via build flags
+    -DLV_CONF_SKIP
+    -DLV_COLOR_DEPTH=16
+    -DLV_USE_LOG=0
+    -DLV_USE_BAR=1
+    -DLV_USE_LABEL=1
+    -DLV_USE_ARC=1
+    -DLV_USE_BTN=1
+    -DLV_USE_LINE=1
+    -DLV_USE_OBJ=1
+    -DLV_USE_IMG=1
+    -DLV_USE_IMAGE=1
+    -DLV_USE_ANIMIMG=0
+    -DLV_TICK_CUSTOM=1
+    -DLV_USE_SNAPSHOT=1
+
+lib_deps =
+    ; 1.6.4+ ships Arduino_CO5300 in mainline
+    moononournation/GFX Library for Arduino@^1.6.4
+    lewisxhe/SensorLib@^0.2.6
+    lewisxhe/XPowersLib@^0.2.7
+    lvgl/lvgl@^9.2.0
+    bblanchon/ArduinoJson@^7.0.0
+    h2zero/NimBLE-Arduino@^2.1.1
+
+
 [env:waveshare_amoled_216_c6]
 ; C6 sibling of the AMOLED-2.16. Same panel/touch/PMU/IMU, no PSRAM,
 ; single-core RISC-V, BLE 5.3 only (no classic BT). If the build fails
@@ -0,0 +1,55 @@
+#pragma once
+
+// Waveshare ESP32-S3-Touch-AMOLED-2.06 — rectangular AMOLED smartwatch kit.
+// 410x502 CO5300 + FT3168 touch + AXP2101 PMU + QMI8658 IMU + PCF85063 RTC.
+// No IO expander: display/touch reset lines are direct ESP32 GPIOs.
+// IMU is present (initialized for I2C bus health) but rotation is disabled —
+// the panel is non-square and the kit mounts in a fixed orientation.
+
+#define BOARD_NAME           "Waveshare AMOLED 2.06"
+
+// ---- Display geometry (portrait, non-square) ----
+#define LCD_WIDTH            410
+#define LCD_HEIGHT           502
+
+// ---- QSPI display pins (CO5300) ----
+// Same data lines as the 2.16 board, but SCLK and RESET differ.
+#define LCD_CS               12
+#define LCD_SCLK             11        // 2.06: GPIO11 (2.16 board used GPIO38)
+#define LCD_SDIO0            4
+#define LCD_SDIO1            5
+#define LCD_SDIO2            6
+#define LCD_SDIO3            7
+#define LCD_RESET            8         // direct GPIO (2.16 used GPIO2)
+#define LCD_TE               13        // tearing-effect line (unused by GFX driver)
+
+// CO5300 GRAM is wider than the 410px active area, so the visible image needs
+// a horizontal start offset. 22 verified for this panel (matches the value used
+// by other 2.06 firmwares; eliminates the uninitialized green band on the right).
+#define CO5300_COL_OFFSET    22
+
+// ---- I2C bus (touch + PMU + IMU + RTC all share one bus) ----
+#define IIC_SDA              15
+#define IIC_SCL              14
+
+// ---- Touch (FT3168 via minimal inline FocalTech-style I2C reader) ----
+#define TP_INT               38
+#define TP_RST               9         // direct GPIO (active LOW)
+#define FT3168_ADDR          0x38
+
+// ---- PMU ----
+#define AXP2101_ADDR         0x34
+
+// ---- Buttons ----
+#define BTN_BACK_GPIO        0         // BOOT — primary, Space (PTT)
+#define BTN_PWR_GPIO         10        // PWR side button — cycle screens / animations
+// PWR polarity: assumed active LOW with internal pull-up (button to GND, like
+// BOOT). If the screen-cycle button never registers, flip BTN_PWR_ACTIVE_LOW.
+#define BTN_PWR_ACTIVE_LOW   1
+
+// ---- Capability flags ----
+#define BOARD_HAS_SECONDARY_BUTTON 0   // only BOOT via input_hal; PWR via power_hal
+#define BOARD_HAS_ROTATION         0   // non-square panel, fixed orientation
+#define BOARD_HAS_IMU              1   // present + initialized, rotation off
+#define BOARD_HAS_BATTERY          1
+#define BOARD_HAS_IO_EXPANDER      0
@@ -0,0 +1,24 @@
+#include "board.h"
+#include <Arduino.h>
+#include <Wire.h>
+
+// AMOLED-2.06 has no IO expander — display and touch reset lines are direct
+// ESP32 GPIOs. We bring up the shared I2C bus and release both reset lines
+// before any display/touch HAL call runs.
+//
+// Display power: on this kit the AMOLED rail is supplied by the AXP2101 PMU
+// (the "DSI_PWR_EN" net on the schematic sits on the PMIC, not an ESP32 pin),
+// matching the AMOLED-2.16 sibling which lights up with no explicit rail
+// poke after pmu.begin(). If the panel stays dark on first flash, enable the
+// AXP rails in power.cpp (see the commented block there).
+extern "C" void board_init(void) {
+    Wire.begin(IIC_SDA, IIC_SCL);
+
+    // Release the touch controller from reset (active LOW). The display's own
+    // reset is driven by the Arduino_GFX CO5300 driver via LCD_RESET.
+    pinMode(TP_RST, OUTPUT);
+    digitalWrite(TP_RST, LOW);
+    delay(5);
+    digitalWrite(TP_RST, HIGH);
+    delay(50);
+}
@@ -0,0 +1,14 @@
+#include "../../hal/board_caps.h"
+#include "board.h"
+
+static const BoardCaps caps = {
+    .name = BOARD_NAME,
+    .width = LCD_WIDTH,
+    .height = LCD_HEIGHT,
+    .button_count = 1,
+    .has_rotation = false,
+    .has_battery = true,
+    .has_imu = true,
+};
+
+const BoardCaps& board_caps(void) { return caps; }
@@ -0,0 +1,55 @@
+#include "../../hal/display_hal.h"
+#include "board.h"
+#include <Arduino.h>
+#include <Arduino_GFX_Library.h>
+
+// AMOLED-2.06 is fixed at 0° (non-square 410x502 panel — the 2.16 board's CPU
+// strip-rotation assumes a square panel and can't be reused here). No rot_buf.
+//
+// Display driver is the CO5300 (same controller family as the 2.16 board).
+// Reset is a direct GPIO (LCD_RESET), so the GFX driver owns it. The CO5300's
+// active area starts partway into the controller GRAM, so it gets a column
+// offset to center the image (CO5300_COL_OFFSET — verify on hardware).
+
+static Arduino_DataBus* bus = nullptr;
+static Arduino_CO5300*  gfx = nullptr;
+
+void display_hal_init(void) {
+    bus = new Arduino_ESP32QSPI(
+        LCD_CS, LCD_SCLK, LCD_SDIO0, LCD_SDIO1, LCD_SDIO2, LCD_SDIO3);
+    // CO5300: (bus, rst, rotation, w, h, col_off1, row_off1, col_off2, row_off2)
+    gfx = new Arduino_CO5300(
+        bus, LCD_RESET, 0 /* no rotation */,
+        LCD_WIDTH, LCD_HEIGHT, CO5300_COL_OFFSET, 0, 0, 0);
+}
+
+void display_hal_begin(void) {
+    gfx->begin();
+    gfx->fillScreen(0x0000);
+    gfx->setBrightness(200);
+}
+
+void display_hal_set_brightness(uint8_t level) {
+    if (gfx) gfx->setBrightness(level);
+}
+
+void display_hal_fill_screen(uint16_t color) {
+    if (gfx) gfx->fillScreen(color);
+}
+
+void display_hal_draw_bitmap(int32_t x, int32_t y, int32_t w, int32_t h,
+                             const uint16_t* pixels) {
+    if (gfx) gfx->draw16bitRGBBitmap(x, y, (uint16_t*)pixels, w, h);
+}
+
+void display_hal_tick(void) {
+    // No rotation handling needed on this board.
+}
+
+// CO5300 requires even-aligned flush regions.
+void display_hal_round_area(int32_t* x1, int32_t* y1, int32_t* x2, int32_t* y2) {
+    *x1 = *x1 & ~1;
+    *y1 = *y1 & ~1;
+    *x2 = *x2 | 1;
+    *y2 = *y2 | 1;
+}
@@ -0,0 +1,25 @@
+#include "../../hal/imu_hal.h"
+#include "board.h"
+#include <Arduino.h>
+#include <Wire.h>
+#include <SensorQMI8658.hpp>
+
+// AMOLED-2.06 ships with QMI8658 populated, but the panel is non-square and
+// mounts in a fixed orientation, so rotation is disabled. We initialize the
+// device anyway to keep the shared I2C bus healthy, but always report 0.
+
+static SensorQMI8658 imu;
+
+void imu_hal_init(void) {
+    if (!imu.begin(Wire, QMI8658_L_SLAVE_ADDRESS, IIC_SDA, IIC_SCL)) {
+        Serial.println("QMI8658 init failed");
+        return;
+    }
+    Serial.println("QMI8658 init OK (rotation disabled on this board)");
+}
+
+void imu_hal_tick(void) {
+    // No-op — rotation is disabled.
+}
+
+uint8_t imu_hal_rotation_quadrant(void) { return 0; }
@@ -0,0 +1,20 @@
+#include "../../hal/input_hal.h"
+#include "board.h"
+#include <Arduino.h>
+
+// AMOLED-2.06 exposes the BOOT button as the primary HID input. The PWR side
+// button is handled in power_hal (BTN_PWR_GPIO). No secondary button.
+
+void input_hal_init(void) {
+    pinMode(BTN_BACK_GPIO, INPUT_PULLUP);
+}
+
+bool input_hal_is_held(InputButton btn) {
+    switch (btn) {
+    case INPUT_BTN_PRIMARY:
+        return digitalRead(BTN_BACK_GPIO) == LOW;
+    case INPUT_BTN_SECONDARY:
+        return false;   // not present on this board
+    }
+    return false;
+}
@@ -0,0 +1,119 @@
+#include "../../hal/power_hal.h"
+#include "board.h"
+#include <Arduino.h>
+#include <Wire.h>
+#include <XPowersLib.h>
+
+// AXP2101 provides battery monitoring. The PWR side button on this kit is a
+// direct ESP32 GPIO (BTN_PWR_GPIO), not the AXP PKEY, so we poll it and
+// synthesize the same three edges the AXP IRQ path produces on the 2.16 board:
+//   short    — fired on release if the hold was shorter than PWR_LONG_MS
+//   long     — fired once when a hold crosses PWR_LONG_MS
+//   release  — fired on every release edge
+// This keeps the hold-to-pair gesture logic in main.cpp board-agnostic.
+
+#define BATTERY_POLL_MS  2000
+#define CHARGING_POLL_MS 500
+#define PWR_POLL_MS      50
+#define PWR_LONG_MS      1500   // hold threshold, mirrors the AXP LONG IRQ
+
+#if BTN_PWR_ACTIVE_LOW
+  #define PWR_IS_DOWN(level) ((level) == LOW)
+#else
+  #define PWR_IS_DOWN(level) ((level) == HIGH)
+#endif
+
+static XPowersPMU pmu;
+
+static int      cached_pct        = -1;
+static bool     cached_charging   = false;
+static bool     cached_vbus       = false;
+static bool     pwr_pressed_flag  = false;
+static bool     pwr_long_flag     = false;
+static bool     pwr_released_flag = false;
+static bool     last_pwr_down     = false;   // edge detector for BTN_PWR_GPIO
+static uint32_t pwr_press_started_ms = 0;
+static bool     pwr_long_fired    = false;
+static uint32_t last_battery_ms   = 0;
+static uint32_t last_charging_ms  = 0;
+static uint32_t last_pwr_ms       = 0;
+
+void power_hal_init(void) {
+    if (!pmu.begin(Wire, AXP2101_ADDR, IIC_SDA, IIC_SCL)) {
+        Serial.println("AXP2101 init failed");
+        return;
+    }
+    Serial.println("AXP2101 init OK");
+
+    pmu.enableBattDetection();
+    pmu.enableBattVoltageMeasure();
+
+    // ---- OPTIONAL: explicit AMOLED rail enable ----------------------------
+    // The 2.16 sibling lights up without this, so it's left off by default.
+    // If the panel stays DARK on first flash, the display rail isn't powered.
+    // Uncomment and set the channels/voltages to match the Waveshare 2.06
+    // schematic (typical AXP2101 AMOLED kits use the ALDO/BLDO rails):
+    //
+    //   pmu.setALDO1Voltage(1800); pmu.enableALDO1();   // panel logic 1.8V
+    //   pmu.setBLDO1Voltage(3300); pmu.enableBLDO1();   // panel/touch 3.3V
+    //   pmu.setBLDO2Voltage(3300); pmu.enableBLDO2();
+    //   delay(50);
+    // -----------------------------------------------------------------------
+
+    // PWR button is a direct GPIO on this board.
+    pinMode(BTN_PWR_GPIO, BTN_PWR_ACTIVE_LOW ? INPUT_PULLUP : INPUT_PULLDOWN);
+
+    cached_charging = pmu.isCharging();
+    cached_vbus     = pmu.isVbusIn();
+    cached_pct = pmu.getBatteryPercent();
+}
+
+void power_hal_tick(void) {
+    uint32_t now = millis();
+
+    if (now - last_charging_ms >= CHARGING_POLL_MS) {
+        last_charging_ms = now;
+        cached_charging = pmu.isCharging();
+        cached_vbus     = pmu.isVbusIn();
+    }
+    if (now - last_battery_ms >= BATTERY_POLL_MS) {
+        last_battery_ms = now;
+        cached_pct = pmu.getBatteryPercent();
+    }
+    if (now - last_pwr_ms >= PWR_POLL_MS) {
+        last_pwr_ms = now;
+        bool pwr_down = PWR_IS_DOWN(digitalRead(BTN_PWR_GPIO));
+        if (pwr_down && !last_pwr_down) {            // press begins
+            pwr_press_started_ms = now;
+            pwr_long_fired = false;
+        } else if (pwr_down && last_pwr_down) {      // held
+            if (!pwr_long_fired && (now - pwr_press_started_ms >= PWR_LONG_MS)) {
+                pwr_long_flag  = true;
+                pwr_long_fired = true;
+            }
+        } else if (!pwr_down && last_pwr_down) {     // release
+            pwr_released_flag = true;
+            if (!pwr_long_fired) pwr_pressed_flag = true;  // short press
+        }
+        last_pwr_down = pwr_down;
+    }
+}
+
+int  power_hal_battery_pct(void) { return cached_pct; }
+bool power_hal_is_charging(void) { return cached_charging; }
+bool power_hal_is_vbus_in(void)  { return cached_vbus; }
+
+bool power_hal_pwr_pressed(void) {
+    if (pwr_pressed_flag) { pwr_pressed_flag = false; return true; }
+    return false;
+}
+
+bool power_hal_pwr_long_pressed(void) {
+    if (pwr_long_flag) { pwr_long_flag = false; return true; }
+    return false;
+}
+
+bool power_hal_pwr_released(void) {
+    if (pwr_released_flag) { pwr_released_flag = false; return true; }
+    return false;
+}
@@ -0,0 +1,74 @@
+#include "../../hal/touch_hal.h"
+#include "board.h"
+#include <Arduino.h>
+#include <Wire.h>
+
+// Minimal capacitive-touch reader for the FT3168 (FocalTech). Same data layout
+// as the FT3168 on the AMOLED-1.8 board, so we reuse the inline reader instead
+// of vendoring the GPLv3 Arduino_DriveBus library.
+//   reg 0x02:        low nibble = active finger count
+//   reg 0x03 / 0x04: X1 high (low nibble) + X1 low
+//   reg 0x05 / 0x06: Y1 high (low nibble) + Y1 low
+//
+// Axis orientation: started with no swap/mirror (matches the portrait FT3168
+// on the 1.8 board). If touch coordinates come out flipped/swapped on this
+// panel, mirror/swap them in touch_read_into_shared_state() below.
+
+static volatile bool     touch_data_ready = false;
+static volatile bool     touch_pressed = false;
+static volatile uint16_t touch_x = 0;
+static volatile uint16_t touch_y = 0;
+
+static void IRAM_ATTR touch_isr(void) {
+    touch_data_ready = true;
+}
+
+static void touch_read_into_shared_state(void) {
+    Wire.beginTransmission(FT3168_ADDR);
+    Wire.write(0x02);
+    if (Wire.endTransmission(false) != 0) { touch_pressed = false; return; }
+    if (Wire.requestFrom((uint8_t)FT3168_ADDR, (uint8_t)5) != 5) { touch_pressed = false; return; }
+    uint8_t fingers = Wire.read() & 0x0F;
+    uint8_t xH = Wire.read();
+    uint8_t xL = Wire.read();
+    uint8_t yH = Wire.read();
+    uint8_t yL = Wire.read();
+    if (fingers == 0 || fingers > 5) {
+        touch_pressed = false;
+        return;
+    }
+    touch_x = ((uint16_t)(xH & 0x0F) << 8) | xL;
+    touch_y = ((uint16_t)(yH & 0x0F) << 8) | yL;
+    touch_pressed = true;
+}
+
+void touch_hal_init(void) {
+    // FT3168 power-mode register 0xA5 = 0x00: active scanning.
+    Wire.beginTransmission(FT3168_ADDR);
+    Wire.write(0xA5);
+    Wire.write(0x00);
+    Wire.endTransmission();
+
+    // Verify the controller answers (FT3168 chip-id is reg 0xA0).
+    Wire.beginTransmission(FT3168_ADDR);
+    Wire.write(0xA0);
+    if (Wire.endTransmission(false) == 0 && Wire.requestFrom((uint8_t)FT3168_ADDR, (uint8_t)1) == 1) {
+        Serial.printf("Touch FT3168 ID=0x%02X (addr 0x%02X)\n", Wire.read(), FT3168_ADDR);
+    } else {
+        Serial.printf("Touch FT3168 ID read failed (addr 0x%02X)\n", FT3168_ADDR);
+    }
+
+    pinMode(TP_INT, INPUT_PULLUP);
+    attachInterrupt(TP_INT, touch_isr, FALLING);
+    Serial.println("Touch attached on INT pin");
+}
+
+void touch_hal_read(uint16_t* x, uint16_t* y, bool* pressed) {
+    if (touch_data_ready) {
+        touch_data_ready = false;
+        touch_read_into_shared_state();
+    }
+    *x = touch_x;
+    *y = touch_y;
+    *pressed = touch_pressed;
+}