Add Waveshare ESP32-S3-Touch-AMOLED-2.06 board port + Windows daemon fixes

- New board firmware/src/boards/waveshare_amoled_206/ (CO5300 410x502,
  FT3168 touch, AXP2101 PMU, QMI8658 IMU). PlatformIO env
  waveshare_amoled_206. CO5300_COL_OFFSET=22, fixed orientation,
  PWR button on GPIO10, FocalTech inline touch reader.
- Windows daemon: fix advertised device name (Claude Controller ->
  Clawdmeter) to match firmware ble.cpp, and add CLAWDMETER_ADDRESS env
  fallback so it connects by address when the bonded HID device is not
  advertising (Windows keeps it HID-connected).

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>

daemon/claude_usage_daemon_windows.py

@@ -23,7 +23,12 @@ import httpx
 from bleak import BleakClient, BleakScanner
 from bleak.exc import BleakError
 
-DEVICE_NAME = "Claude Controller"
+DEVICE_NAME = "Clawdmeter"   # must match firmware ble.cpp DEVICE_NAME
+# Optional direct-connect address. Once the device is bonded as a BLE HID
+# keyboard, Windows keeps it connected, so it stops advertising and an active
+# scan (find_device_by_name) never sees it. Setting CLAWDMETER_ADDRESS lets the
+# daemon connect straight to the bonded device by address via WinRT.
+DEVICE_ADDRESS = os.environ.get("CLAWDMETER_ADDRESS")
 SERVICE_UUID = "4c41555a-4465-7669-6365-000000000001"
 RX_CHAR_UUID = "4c41555a-4465-7669-6365-000000000002"
 REQ_CHAR_UUID = "4c41555a-4465-7669-6365-000000000004"
@@ -162,7 +167,12 @@ async def scan_for_device():
     device = await BleakScanner.find_device_by_name(DEVICE_NAME, timeout=SCAN_TIMEOUT)
     if device:
         log(f"Found: {device.address}")
-    return device  # BLEDevice or None — NOT an address string
+        return device  # BLEDevice
+    if DEVICE_ADDRESS:
+        # Bonded device that's connected to Windows won't advertise — connect by address.
+        log(f"Not advertising; connecting by bonded address {DEVICE_ADDRESS}")
+        return DEVICE_ADDRESS  # address string — BleakClient accepts it on WinRT
+    return device  # None
 
 
 class Session:
@@ -324,7 +334,8 @@ async def connect_and_run(device, stop_event: asyncio.Event, tray_state=None) ->
 
     Returns True if at least one successful write occurred.
     """
-    log(f"Connecting to {device.address}...")
+    addr = device if isinstance(device, str) else device.address
+    log(f"Connecting to {addr}...")
     # D-01: retry wrapper — defeats WinRT post-wake failure modes
     # (Could not get GATT services: Unreachable, stale is_connected).
     # Rebuild a fresh BleakClient each attempt (locked D-05 recipe).